We see the building sand table model or landscape model, there will be some finishing effect of architectural sketches. Architectural sketch is a common part of sand table model. Although it accounts for a small proportion, it is indispensable. The common architectural sketch includes sculpture, rockery, leisure facilities and relief. So, how to make the architectural sketch in the sand table model of Jinan model company?

一、在制作建筑小品模型時，要根據表現對象來選擇合適的材料，如：

1、 When making the model of architectural sketch, we should choose the appropriate materials according to the performance objects, such as:

1、在制作假山類小品，可用碎石塊或碎有機玻璃塊，通過粘合、噴色，便可制作形態各異的假山。

1. In the production of rockery pieces, you can use broken stones or broken plexiglass blocks to make rockeries of different shapes through bonding and color spraying.

2、在制作雕塑類小品時，可用橡皮、紙黏土、石膏、鐵線、木條等可塑性強的材料來堆積、制作表現力和感染力很強的雕塑小品。

2. In the production of sculpture pieces, we can use rubber, paper clay, gypsum, iron wire, wood and other plastic materials to pile up and make sculpture pieces with strong expression and appeal.

3、在制作其他的建筑小品時，可采用各種顏色的橡皮泥塑進行塑造。

3. In the production of other architectural sketches, various colors of rubber clay can be used to shape.

4、在制作浮雕類建筑小品時，可采用薄銅片制作，但需注意取材要薄。

4. In the production of relief architectural pieces, thin copper sheet can be used, but the material should be thin.
               

二、不同建筑小品制作方法不同，如：

2、 Different architectural sketches are made in different ways, such as:

1、薄銅片做浮雕模型很形象，其做法是，按比例將銅片裁好，用刻蠟紙筆在銅片的背面劃出圖案，翻過來用建筑膠粘在要求的位置，即形成浮雕模型;2、將粉筆用刻刀加工后，配上有機玻璃片底臺就能做出雕像模型;3、用各種顏色的橡皮泥可塑造出多種建筑小品模型;4、把各種做盆景用的吸水石砸成小塊，用801大力膠粘成各種形狀即成假山模式。這個需要根據具體的制作小品和使用材料來決定。

1. The method is to cut the copper sheet according to the proportion, draw the pattern on the back of the copper sheet with a crayon, turn it over and glue it to the required position with architectural glue, that is, to form a relief model; 2. After the chalk is processed with a knife, it can be made into a statue model with a plexiglass base; 3. Using various colors of plasticine can create a variety of Architectural Sketch models; 4. Smashing all kinds of water absorbing stones used for bonsai into small pieces, and using 801 to glue them into various shapes to form rockery model. This needs to be decided according to the specific production sketch and the materials used.

以上就是關于沙盤模型中的建筑小品制作方法就介紹到這，沙盤模型中的建筑小品在表現形式和深度上要根據模型的比例和主體深度而定。—般來說，在表現形式要抽象化。因?yàn)?，這類小品的物象是經過縮微的，沒有必要、也不可能與實物完全一致。有時，這類配景過于具象往往會引起人們視覺的轉移。同時，也不免產生幾分工匠制作的味道。所以，制作建筑小品一定要合理地選用材料，恰當?shù)剡\(yùn)用表現形式，準確地掌握制作深度。只有做到三者的有機結合，才能處理好建筑小品的制作，同時達到預期的效果。希望以上內容能夠幫助到大家，如想了解更多精彩資訊請點擊：濟南模型公司http://www.vozpt.com。

The above is about the method of making architectural sketches in the sand table model. The form and depth of architectural sketches in the sand table model should be determined according to the scale of the model and the depth of the main body. Generally speaking, the form of expression should be abstract. Because the image of this kind of sketch is miniature, it is unnecessary and impossible to be completely consistent with the real object. Sometimes, this kind of scenery is too concrete, which often leads to the shift of people's visual center. At the same time, it can't help but produce a taste of craftsmanship. Therefore, the production of architectural sketches must be reasonable selection of materials, appropriate use of forms of expression, and accurately grasp the depth of production. Only the organic combination of the three can deal with the production of architectural sketches and achieve the desired effect. I hope the above content can help you. For more wonderful information, please click: Jinan model company http://www.vozpt.com .