1、制作標簽以標簽的形式標記出該模型的比例、指北針、項目名稱、制作團隊或作者。有時也可能會有附加的解說詞或關鍵說明詞。需要注意的是，所有出現在模型底盤上的文字或符號都是整個模型中的一部分， 都要考慮到它們的準確性和放置位置所形成的構成美感。

1. Label the scale, compass, project name, production team or author of the model in the form of label. Sometimes there may be additional commentary or key commentary. It should be noted that all the characters or symbols appearing on the chassis of the model are part of the whole model, and their accuracy and aesthetic feeling formed by their placement should be considered.

2、確立底盤的規格及樣式底盤的尺寸并非隨意確定，需要根據模型主體及環境的總尺寸來進行設計。通常，為了使模型主體從整體中突顯出來以及構圖美觀，模型中的建筑主體及周圍環境配景和底盤的邊緣都會有一定的間隔， 間隔距離的大小可根據具體模型確定。

2. To establish the specification and style of the chassis, the size of the chassis is not determined at will. It needs to be designed according to the overall size of the main body of the model and the environment. Usually, in order to make the main body of the model stand out from the whole and make the composition beautiful, there will be a certain interval between the main body of the building and the surrounding environment and the edge of the chassis, and the interval distance can be determined according to the specific model.

有時，在模型主體、周邊環境和底盤邊緣留一小段間隔，以體現構圖的完整。有時，建筑主體和底盤各邊緣的間隔很大，以表現場地中的建筑或有意突出建筑主體。

Sometimes, leave a small space between the main body of the model, the surrounding environment and the edge of the chassis to reflect the integrity of the composition. Sometimes, the space between the main body of the building and the edges of the chassis is very large to show the buildings in the site or to highlight the main body of the building intentionally.
           

3、底盤的標高示意在模型制作中，底盤所示意的海拔高度通常為+0.00m↓下的結構時，底盤上的建筑及環境模型按照正常標高進行制作，當遇到表現地面以下的結構時，需要將底盤的對應位置切開，將地面以下的內容與底盤進行固定和粘貼，以表現地面以下的內容。

3. Elevation of the chassis in model making, when the elevation indicated by the chassis is usually the structure under + 0.00m ↓, the building and environment model on the chassis is made according to the normal elevation. When the structure below the ground is shown, the corresponding position of the chassis needs to be cut, and the content below the ground and the chassis are fixed and pasted to show the content below the ground.

例如，地基、地下景觀、 下沉廣場、地下軌道交通、地下建筑等。隨意設置底盤海拔高度在實際制作中并不可取，如確實需要時，應該對底盤所表示的標高做出明顯標注。

For example, foundation, underground landscape, sunken square, underground rail transit, underground buildings, etc. It is not advisable to set the altitude of the chassis at will in the actual production. If it is really necessary, the elevation indicated by the chassis should be clearly marked.

4、了解主體材料重量首先需要了解并預估建筑主體及周邊環境所使用材料的大概重量，以便確定選擇什么樣的材料和工藝制作底盤。

4. To understand the weight of the main materials, we need to understand and estimate the approximate weight of the materials used in the main building and the surrounding environment, so as to determine what kind of materials and technology to choose.

感謝您的閱讀，希望以上內容對您有所幫助，如想了解更多精彩內容請點擊：淄博模型公司http://www.vozpt.com 。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click: Zibo model company http://www.vozpt.com  .