The chassis base of sand table model is also a section that can not be ignored in the whole process of sand table model making. It is the display cornerstone of a high-quality sand table model. What are the contents of sand table model chassis production? Let's take a look at the vision model.

沙盤模型底盤制作有哪些內容：

What are the contents of making sand table model chassis:

1、制作標簽以標簽的形式標記出該模型的比例、指北針、項目名稱、制作團隊或作者。有時也可能會有附加的解說詞或關鍵說明詞。需要注意的是，所有出現在模型底盤上的文字或符號都是整個模型中的一部分，都要考慮到它們的準確性和放置位置所形成的構成美感。

1. Make a label to mark the scale, north arrow, project name, production team or author of the model in the form of a label. Sometimes there may be additional commentary or key instructions. It should be noted that all words or symbols appearing on the model chassis are part of the whole model, and their accuracy and placement position should be taken into account.

2、確立底盤的規格及樣式底盤的尺寸并非隨意確定,需要根據模型主體及環境的總尺寸來進行設計。通常，為了使模型主體從整體中突顯出來以及構圖美觀，模型中的建筑主體及周圍環境配景和底盤的邊緣都會有一定的間隔，間隔距離的大小可根據具體模型確定。

2. The specification and style of the chassis are determined. The size of the chassis is not determined arbitrarily, but needs to be designed according to the overall size of the main body of the model and the environment. Generally, in order to make the main body of the model stand out from the whole and make the composition beautiful, there will be a certain interval between the main body of the building in the model, the surrounding environment and the edge of the chassis. The size of the interval distance can be determined according to the specific model.

有時，在模型主體、周邊環境和底盤邊緣留一小段間隔，以體現構圖的完整。有時，建筑主體和底盤各邊緣的間隔很大，以表現場地中的建筑或有意突出建筑主體。

Sometimes, leave a short interval between the main body of the model, the surrounding environment and the edge of the chassis to reflect the integrity of the composition. Sometimes, the edges of the building body and the chassis are widely spaced to represent the buildings in the site or deliberately highlight the building body.

3、底盤的標高示意在模型制作中，底盤所示意的海拔高度通常為+0.00m↓下的結構時，底盤上的建筑及環境模型按照正常標高進行制作，當遇到表現地面以下的結構時，需要將底盤的對應位置切開，將地面以下的內容與底盤進行固定和粘貼，以表現地面以下的內容。

3. Elevation diagram of chassis during model making, when the altitude indicated by the chassis is usually the structure below + 0.00m ↓, the building and environmental model on the chassis shall be made according to the normal elevation. When encountering the structure below the ground, the corresponding position of the chassis shall be cut, and the content below the ground shall be fixed and pasted with the chassis to represent the content below the ground.

4、了解主體材料重量首先需要了解并預估建筑主體及周邊環境所使用材料的大概重量，以便確定選擇什么樣的材料和工藝制作底盤。

4. To understand the weight of main materials, we first need to understand and estimate the approximate weight of materials used in the main body of the building and the surrounding environment, so as to determine what kind of materials and processes are selected to make the chassis.

以上內容就是對沙盤模型底盤制作有哪些內容的介紹了，不相同的沙盤模型底盤原料都不相同，主要以鞏固而又輕便為好?，F(xiàn)在制造底盤常選用的木質多為輕型板、三合板、多層板等。

The above content is an introduction to the production of sand table model chassis. Different sand table model chassis have different raw materials, which are mainly solid and lightweight. At present, the wood commonly used in manufacturing chassis is mostly light board, plywood, multilayer board, etc.