Water surface is one of the most common scenes in sand table building model. In different sand table models, the surface performance of water is different. Generally, the water surface model is made according to the style and scale of the building sand table model. So, in the building model, how is the water surface formed?
1. 在建筑模型的大尺度水面制作時，應考慮水面與路面的高差。一般采用一般的方法,進行漏水的處理首先在水面部分底盤,透明的有機玻璃或透明塑料板,一粒是困在漏水的地方根據設計高度差,使用藍色噴漆噴涂顏色下面透明板。這樣，水的高度和低音之間的差異就可以顯示出來。另一方面，透明板在陽光的背景下和底漆為藍色，其模擬效果非常好。
1. When making large-scale water surface of building model, the height difference between water surface and pavement shall be considered. Generally, the general method is adopted. For the treatment of water leakage, firstly, the water surface part of the chassis, transparent plexiglass or transparent plastic plate, one of which is trapped in the water leakage area. According to the design height difference, blue spray paint is used to spray the transparent plate under the color. In this way, the difference between the height of the water and the bass can be shown. On the other hand, the transparent plate in the sun background and the primer is blue, its simulation effect is very good.
2. 在進行小規模建筑模型的水面制作時，可以忽略水面與路面的高差。在制作的時候，你可以用藍色的便利貼直接根據它的形狀來切割。剪切后，按其位置粘貼。此外，我們還可以使用陰影的方法進行處理。其做法是，先將堵膜貼在水面位置，然后再進行滲漏。雕刻完成后，用藍色顏料噴涂顏色。油漆干后，應剝?nèi)テ帘文ぁ?/div>
2. When making the water surface of small-scale building model, the height difference between the water surface and the road surface can be ignored. When you make it, you can use the blue post it notes to cut it directly according to its shape. After cutting, paste according to its position. In addition, we can also use shadow method for processing. The method is to stick the plugging film on the water surface first, and then carry out leakage. After the carving is completed, the color is sprayed with blue paint. After the paint is dry, the shielding film shall be stripped off.
在建造模型時，有許多方法可以使水面浮出。為了更好地展示沙盤模型的實際效果，人們對動態水進行了大量的模擬。
There are many ways to raise the surface of the water when building a model. In order to better show the actual effect of the sand table model, people have carried out a large number of simulation of dynamic water.
以上就是聊城模型公司對建筑模型水面如何制作的詳細介紹，想要了解更多請點擊官網http://www.vozpt.com
The above is the detailed introduction of Liaocheng model company on how to make building model water surface. For more information, please click http://www.vozpt.com
